293 Cory - Equipment and Instructions


1. Ceiling mounted Epson G5200W WXGA Projector (native resolution is 1280 x 800)

Other Available Equipment

AirBears authenticated (hardwired - blue cable)
EECS (hardwired - yellow cable) port for EECS registered machines

It is strongly recommended that you familiarize yourself with the room equipment and controls before your presentation. If you need assistance, please contact eeav(at)eecs.berkeley.edu. 

Ceiling mounted LCD Projector:

Press the "ON" button on the AV controller to turn on the projector.  Wait a few seconds, a blue screen will appear.  Next, press the "COMP" button to select source.  Toggling the "COMP" button switches between HDMI and VGA input. 

            Please turn the projector off before leaving.  Thank you. 

Laptop connections:

To display a laptop (w/ VGA source), connect the VGA cable.  Toggle the "COMP" button on the AV controller until "Computer 1" is displayed on the screen.  To display a laptop (w/ HDMI source), connect the HDMI cable.  Toggle the "COMP" button on the AV controller until "HDMI" is displayed on the screen.


Last modified by Webmaster - Jul. 20, 2018

Email questions, comments and suggestions to esg(at)eecs.berkeley.edu
University of California, Berkeley
Electronics Support Group, EECS
377 Cory Hall #1770
Berkeley, CA 94720-1770