299 Cory - Equipment and Instructions


1. Ceiling mounted Epson G5200W WXGA Projector (native resolution is 1280 x 800)

2. Teac AG-500 Receiver

3. Yorkville C120W Speakers

4. Laptop A/V Connections

Other Available Equipment

AirBears authenticated (hardwired - blue cable)
EECS (hardwired - yellow cable) port for EECS registered machines

It is strongly recommended that you familiarize yourself with the room equipment and controls before your presentation. If you need assistance, please contact eeav(at)eecs.berkeley.edu or call (510) 847-3783.

Ceiling mounted  LCD Projector:

Press the "ON" button on the AV controller to turn on the projector.  Wait a few seconds, a blue screen will appear. Next, press the "COMP" button to select source. Toggling the "COMP" button to select "Computer 1" for laptop display.

Please turn the projector off before leaving.  Thank you.

Laptop connections:

To display a laptop, connect the cables on top of the bench as per the labels.  Toggle the "COMP" button on the AV controller until the "Computer 1"  is displayed on the screen.


Turn on the Teac receiver housed under the bench, select "CD" input and use the volume control to adjust volume.


Last modified by Webmaster - Oct. 10, 2012

Email questions, comments and suggestions to csav(at)eecs.berkeley.edu

University of California, Berkeley
Electronics Support Group, EECS
377 Cory Hall #1770
Berkeley, CA 94720-1770
(510) 847-3783 or (510) VIPER-TD