373 Soda - Equipment and Instructions


1. Ceiling mounted Panasonic FW430 WXGA LCD Projector (native resolution is 1280 x 800)

2. Laptop Connections

Other Available Equipment.

AirBears authenticated (hardwired - blue cable)
EECS (hardwired - yellow cable) port for EECS registered machines

On the wall just to the left of the door is the on/off switch for the Ceiling Projector.  Please do not use this switch.  Use the AV controller on the wall under the whiteboard next to the laptop station to turn the projector on and off.

It is strongly recommended that you familiarize yourself with the room equipment and controls before your presentation. If you need assistance, please contact csav(at)eecs.berkeley.edu. 

Ceiling mounted LCD Projector:

Please check that the wall switch next to the door is "on."  Press the "ON" button on the AV controller mounted on the wall under the whiteboard to turn on the projector.  Wait a few seconds, a blue screen will appear. Next, press the "COMP" button to select source.  Toggling the "COMP" button to switch to laptop.

Please turn the projector off before leaving.  Thank you.

Laptop connections:

To display a laptop, connect the cable on top of the cart as per the labels, and toggle the "COMP" button on the AV controller until "Computer  2" is displayed on the screen.


Last modified by Webmaster - Jul. 20, 2018

Email questions, comments and suggestions to esg(at)eecs.berkeley.edu
University of California, Berkeley
Electronics Support Group, EECS
377 Cory Hall #1770
Berkeley, CA 94720-1770