1. Ceiling mounted Panasonic PT-FZ570 WUXGA LCD Projector (native resolution is 1920 x 1200)
2. Laptop connections
3. TOA mono audio amp
Other Available Equipment
AirBears authenticated (hardwired - blue cable)
EECS (hardwired - yellow cable) port for EECS registered machines
The controls for the lights are in the back of the room next to the southwest door.
It is strongly recommended that you familiarize yourself with the room equipment and controls before your presentation. If you need assistance, please contact csav(at)eecs.berkeley.edu or call (510) 847-3783.
Ceiling mounted LCD Projector:
Press the "ON" button on the AV controller to turn on the projector. Wait a few seconds, a blue screen will appear. Next, press the "COMP" button to select source.
turn the projector off
before leaving. Thank you.
To display a laptop (w/ VGA source), connect the VGA cable, and toggle the "COMP" button on the AV controller until "Computer 1" is selected on the screen. To display a laptop (w/ HDMI source), connect the HDMI cable, and toggle the "COMP" button on the AV controller until "HDMI 1" is selected on the screen.
Audio: Use the volume
buttons on the AV controller to adjust volume.
Use the volume buttons on the AV controller to adjust volume.
Last modified by Webmaster -Feb. 2, 2017
Email questions, comments and suggestions to csav(at)eecs.berkeley.edu
University of California, Berkeley
Electronics Support Group, EECS
377 Cory Hall #1770
Berkeley, CA 94720-1770
(510) 847-3783 or (510) VIPER-TD